Scott Greczkowski said:There is supposed to be a MAJOR software release for the 622 around October 1st, this new software version is suppoed to have some new stuff in it (what new stuff I don't know).
Whoa! I didn't know about this. Can you refer me to another thread that discusses this problem? (I was thinking about sub'ing to locals just to get guide data and be able to record. This problem would make that pointless.)ChetK said:They have to get HD locals timers working. Basically, I subscribe to locals (so I can have the guide data and so I can have two streams of local HD to choose from). If I set a timer on the off-the-air version of the channel, they don't get recorded because the DVR doesn't know whether or not it should record the show from the off-the-air version of the channel or the satellite version of the channel
noremac said:Originally Posted by ChetK
They have to get HD locals timers working. Basically, I subscribe to locals (so I can have the guide data and so I can have two streams of local HD to choose from). If I set a timer on the off-the-air version of the channel, they don't get recorded because the DVR doesn't know whether or not it should record the show from the off-the-air version of the channel or the satellite version of the channel
I Dont have problems with this at all and I record between ota and local dn hd all the time..
Still confusing, since it says FULL PHASE, which means ALL receivers get it. Usually if it's a PARTIAL PHASE, then it's when they're testing before going to FULL.Scott Greczkowski said:That means they rolled it out to a small group of receivers (probably all internal) to make sure there were not problems with the update before making it public.
noremac said:Whoa! I didn't know about this. Can you refer me to another thread that discusses this problem? (I was thinking about sub'ing to locals just to get guide data and be able to record. This problem would make that pointless.)
goaliebob99 said:I Dont have problems with this at all and I record between ota and local dn hd all the time..
ralfyguy said:Ouote: PID:08B3h, ID:KMTC, FW:L360, Model:ViP622.<only 198 serial numbers covering>
What's that mean?![]()
Does this mean 198 receivers currently have this software now or only 198 will be getting the release tonight?Smith said:.<only 198 serial numbers covering>
ralfyguy said:Still no fixes for HDMI issues and the self reboots on the 622!
DAMN!!!![]()
DN tpn19@119W. Current FW list:
PID:0850h, ID:1DVD, FW:L179, Model:PVR721.
PID:0851h, ID:KJTC, FW:L321, Model:PVR721.
PID:0853h, ID:1HBC, FW:L277, Model:DVR921.
PID:085Eh, ID:JYTC, FW:BNB1, Model:DVR921.
PID:085Fh, ID:0RVD, FW:05VF, Model:PVR721.
PID:0860h, ID:67UD, FW:P248, Model:DP301e.
PID:0861h, ID:60SD, FW:P309, Model:PVR501.
PID:0862h, ID:3YED, FW:P342, Model:DP301d.
PID:0863h, ID:2LHD, FW:P322, Model:4900.
PID:0864h, ID:3ELD, FW:P350, Model:3900.
PID:0865h, ID:0NQD, FW:115P, Model:3750.
PID:0866h, ID:K3TC, FW:CJF1, Model:PVR501.
PID:0867h, ID:41UD, FW:P214, Model:DP301e.
PID:0868h, ID:J8TC, FW:BKE1, Model:DP301e.
PID:0869h, ID:3CLD, FW:P239, Model:3900.
PID:086Ah, ID:XSTD, FW:01ZF, Model:1000.
PID:086Bh, ID:JQTC, FW:CLC1, Model:PVR501.
PID:086Ch, ID:KKTC, FW:BWF1, Model:DP301d.
PID:086Dh, ID:HNTC, FW:BWD1, Model:DP301d.
PID:086Eh, ID:66UD, FW:P248, Model:DP301e.
PID:086Fh, ID:JATD, FW:01ZF, Model:4000.
PID:0872h, ID:19ND, FW:855P, Model:6000.
PID:0873h, ID:16WD, FW:129P, Model:7100.
PID:0874h, ID:2IFD, FW:842P, Model:1000.
PID:0875h, ID:1HDD, FW:819P, Model:5000.
PID:0876h, ID:0XJD, FW:822P, Model:DSR100.
PID:087Ch, ID:12ND, FW:784P, Model:6000.
PID:087Dh, ID:2HFD, FW:842P, Model:1000.
PID:087Eh, ID:C3TC, FW:BGC1, Model:6000.
PID:0880h, ID:59RD, FW:854P, Model:2700.
PID:0881h, ID:5ARD, FW:854P, Model:2700.
PID:0882h, ID:6VBD, FW:839P, Model:3000.
PID:0883h, ID:4TCD, FW:847P, Model:4000.
PID:0884h, ID:4RCD, FW:846P, Model:4000.
PID:0885h, ID:88T5, FW:0000, Model:ZZZZ.
PID:0886h, ID:58RD, FW:854P, Model:2700.
PID:088Ch, ID:4QCD, FW:846P, Model:4000.
PID:088Dh, ID:6UBD, FW:839P, Model:3000.
PID:088Eh, ID:49RD, FW:798P, Model:2700.
PID:0890h, ID:47ZD, FW:L314, Model:DP322.
PID:0891h, ID:4QXD, FW:L296, Model:DVR522/DVR625.
PID:0892h, ID:13CC, FW:L288, Model:DVR942.
PID:0893h, ID:46ZD, FW:L314, Model:DP322.
PID:0894h, ID:K2TC, FW:BCC1, Model:DVR942.
PID:0895h, ID:KNTC, FW:CVC1, Model:DVR522/DVR625.
PID:0896h, ID:K4TC, FW:CMA1, Model:DP322.
PID:089Dh, ID:IWTC, FW:CUB1, Model:DVR522/DVR625.
PID:089Eh, ID:35ZD, FW:L246, Model:DP322.
PID:089Fh, ID:39XD, FW:L253, Model:DVR522.
PID:08A0h, ID:2FDC, FW:P317, Model:DP311.
PID:08A1h, ID:0HFC, FW:P277, Model:DP111.
PID:08A2h, ID:3BEC, FW:P380, Model:DP811.
PID:08A3h, ID:0HMD, FW:P298, Model:D351.
PID:08A4h, ID:3CEC, FW:P380, Model:DP811.
PID:08ADh, ID:K7TC, FW:AUH1, Model:DP311.
PID:08AEh, ID:38EC, FW:P380, Model:DP811.
PID:08AFh, ID:K9TC, FW:AMB1, Model:DP111.
PID:08B0h, ID:0IAC, FW:L268, Model:ViP211.
PID:08B1h, ID:0GKC, FW:L359, Model:ViP622.
PID:08B2h, ID:KGTC, FW:AEM1, Model:DP422.
PID:08B3h, ID:KMTC, FW:L360, Model:ViP622.
PID:08B4h, ID:KHTC, FW:ASC1, Model:ViP211.
PID:08B5h, ID:J5TC, FW:ANB1, Model:ViP211.
PID:08BDh, ID:KATC, FW:APG1, Model:ViP622.
PID:08BEh, ID:8BTE, FW:DUMY, Model:ZZZZ.
PID:08BFh, ID:ESTC, FW:ACP1, Model:ViP622.
PID:08E0h, ID:03JC, FW:M102, Model:2W_MP.
PID:08EFh, ID:KBTC, FW:AGB1, Model:2W_MP.
PID:08F0h, ID:06PC, FW:1119, Model:DVR942/ViP622.
PID:08F1h, ID:HTTC, FW:1119, Model:DVR942/ViP622.
PID:08F2h, ID:03PC, FW:1130, Model:DVR942.
Done.
My un-educated guess would be that if Native-Passthru doesn't fix it nothing in software will. This is what I am waiting for. There will be a lot of 622 swap outs if the HDMI problem is still here after Native-Passthru is enabled.Tom Bombadil said:I think it is going to be very hard to Dish to fix the 211/411/622 HDMI problems with a software update, as I think it is a hardware problem. But I would be happy to be proved wrong.
Limited time offer