NSS 806

[jorgeldelapaz]

ViewSat Ultra if i Manually add sat,freq. tp from lyngsat can i leave the rest on auto and do a blind scan or do i have to input all the info onto reciver.

 

[turbosat]

Are you trying to get circular C-band? That's what lyngsat shows for that satellite, R (right) and L (left) on the c-band transponders...... what channel are you shooting for?

 

[jorgeldelapaz]

All Fta I have corotor II with C-band and KU with servo

 

[Mr Tony]

ViewSat Ultra if i Manually add sat,freq. tp from lyngsat can i leave the rest on auto and do a blind scan or do i have to input all the info onto reciver.

you can manually add the info into the receiver. Just the frequency, polarity & symbol rate would be needed.

Looks like a fair amount of stuff from South& Central America. As noted above you do need to make sure your C-Band LNB handles circular polarity

 

[1captain]

All Fta I have corotor II with C-band and KU with servo

You should be able to pick up some of the circular transponder with a co-rotor, you will not get them all, I can scan it around 14 here with a chaperral ortho feed, but I have a pair 8515s on that feed an their freq range is 3.4 to 4.2ghz. an I find the best way for me is on the left make them vertical, an the right make them horz.

now a easy way to find that bird is drive over to NSS-10 tune up mega on 3868-vertical-6666, this is a strong transponder. now start bumping you're dish back to the west an put in transponders 3675 vertical an 3803-horiz, those are 2 strong transponders, an you will not need to go far only 3 degrees. an you should see you're quality meter light up, then just take the time to fine tune it in an blind scan it.

Good luck an Happy Holidays

 

[DK_Sat]

To get all the channels from NSS 806 you need the Corotor II Plus International feed.

I have the International feed on my 71/2 Unimash dish and everything is coming in from NSS 806.