FREE ITVN / XTV Receiver

[Kirby Baker]

Finally got it working.. had to disable the SPI firewall built into my router. All is good now...

 

[patrickpiteo]

Finally got it working.. had to disable the SPI firewall built into my router. All is good now...

Hoe (Freudian slip) does it look. I just got mine today and I will be hooking it up if I can get my son out of the living room.. :devil:

 

[Kirby Baker]

its not too shabby.. Its quality on 700kbps streams is close to that of SD on D* or E*.

 

[patrickpiteo]

Yea looks ok at 700kps but not as good as dvd. Stil at times it seems to block up. I know it aint my cable connection or bandwith or speed problem.

 

[philhu]

Anyone else notice the picture freeze sometimes and the audio BACKS UP about 30 seconds, then when it catches up to the video again the video starts moving in fast fwd speeds until 30 seconds goes by.

I've tried changing resolutions, etc.. No help

 

[nelsonix]

Hi Kirby,


You need to configure your router to allow application RTSPT using port 554.
Enter 554 in all cells referring to the port ranges. Make sure the enable button is selected. You may need to power cycle your devices on your LAN after the configuration.

This link should help.>> You may need to select the "triggering tab" and select your router.

http://www.portforward.com/english/routers/port_triggering/Linksys/WRT54G/VideoReQuest.htm

 

[cappy29]

Can you use dsl for that or only broadband.

 

[jgantert]

Can you use dsl for that or only broadband.

DSL should be fine.

-John

 

[Scott Greczkowski]

DSL for the most part is broadband.

BTW I am amazed and gratefull to the folks at ITVN for still making this offer to SatelliteGuys members, it should be know that for every SatelliteGuys member who signs up for this service ITVN is donating $35 to the SatelliteGuys operation fund which help us keep our lights on.

So thank you to them and thanks to all who have signed up.