Get the Best IPTV Service
Comments from a newbie to FTA | Page 8 | SatelliteGuys.US

Comments from a newbie to FTA

Here is the Test File. For the Amiko MINI 4K UHD S2X Receiver Only.
V1.0.69 Allows the User to Manually Set the Symbol Rate of a Transponder as low as 100.
The technical staff of the Demodulator said that the minimum should be greater than 200, and the locking will be relatively slow.
Please test on WPR on 99W and other very low SR Frequencies and let us know.

Use at your own risk!
 

Attachments

Here is the Test File. For the Amiko MINI 4K UHD S2X Receiver Only.
V1.0.69 Allows the User to Manually Set the Symbol Rate of a Transponder as low as 100.
The technical staff of the Demodulator said that the minimum should be greater than 200, and the locking will be relatively slow.
Please test on WPR on 99W and other very low SR Frequencies and let us know.

Use at your own risk!
Who'da thunk I trailblazed this with the V9 haha.
 
Here is the Test File. For the Amiko MINI 4K UHD S2X Receiver Only.
V1.0.69 Allows the User to Manually Set the Symbol Rate of a Transponder as low as 100.
The technical staff of the Demodulator said that the minimum should be greater than 200, and the locking will be relatively slow.
Please test on WPR on 99W and other very low SR Frequencies and let us know.

Use at your own risk!

Casey, have you heard any test results as of yet?
 
Forget LegitFTA for now, i get all sorts of errors there when i try to add an attachment. I started a new thread here with the firmware, maybe it will get seen by more folks. Forgive me k4otl if i hijacked your thread a little bit. Back to you friend.

Code:
https://www.satelliteguys.us/xen/threads/amiko-mini-4k-uhd-s2x-v1-0-69-firmware.416520/
 
  • Like
Reactions: comfortably_numb
Just FYI for those with the V9 Prime receiver; there is an official firmware update from GTMedia available. I installed it this afternoon and it seems to have improved tuning and SQ on several problematic feeds.

It is now 100 degrees F here in suburban Albuquerque, and the WPR mux is solid and sounding great.

Link to upgrade: https://www.freesat.cn/forum/download/file.php?id=13883
 
Last edited:
  • Like
Reactions: mr_rye89 and N5XZS
Screenshot of WPR, booming in at 80-81% SQ on the 1.2m dish. Locked solid for almost an hour now.

IMG_7639.PNG
 
  • Like
Reactions: FTA4PA

Is LegitFTA Down?

Top
Flash Sale Popup