Comments from a newbie to FTA

[Brct203]

cyberham were you ever able to tune low symbol rates on your Edision with this driver? I ask because we have acquired one from Spain and will be looking to configure it later this week. Also, which image do you use most (or prefer)?

with TNAP 5.1 and the special driver I was able to lock all 3 of the low bitrate radio transponders on 117W C-band, respectively at 667, 675 and 833 kS/s. Using a Titanium C2-PLL LNBF

I also use TNAP 5.1 but revert to 4.2 if i need to use the OTA dongle tuner.

 

[cyberham]

with TNAP 5.1 and the special driver I was able to lock all 3 of the low bitrate radio transponders on 117W C-band, respectively at 667, 675 and 833 kS/s...

I just checked my scanned in tps on 117W C. I too have the 667 and 833 tps scanned in via the Edision. I'll check for 675 next time I push my dish to that sat. I'm using TNAP 5.1 (updated 2024-07-29) and DVB driver version 0211-10-3a.

 

[comfortably_numb]

I also use TNAP 5.1 but revert to 4.2 if i need to use the OTA dongle tuner.

The Edision has an OTA dongle available?

 

[cyberham]

The Edision has an OTA dongle available?

I use the Hauppauge 950Q USB dongle. But I have almost no OTA. The only channel mux I can perhaps receive is METV but I can get it now from 101W C-band.

 

[comfortably_numb]

I use the Hauppauge 950Q USB dongle. But I have almost no OTA. The only channel mux I can perhaps receive is METV but I can get it now from 101W C-band.

Thanks, it's been years since I used one of those receivers and I had forgotten this was an option.

 

[Brct203]

I use the Hauppauge 950Q USB dongle. But I have almost no OTA. The only channel mux I can perhaps receive is METV but I can get it now from 101W C-band.

yes that's also what i'm using for OTA. I get about 40 channels for Hartford CT and New York City but rarely watch anything

 

[comfortably_numb]

rarely watch anything

We watch ROAR a lot in this household (not available on C-band but the east coast feed does livestream) plus a couple local stations for news

 

[FTA4PA]

I can confirm that the 955Q model tuner also works with the Edision, at least with OpenPLI which is the image we use.