Daul Tuner with Legacy system

[aikoentp]

I have two antenna's with dual legacy LNBF's feeding an SW64. I have a signal splitter feeding a 622. After running check switch both 119 & 110 birds are detected. However I'm only seeing even tranponders on 119. Is my concept correct?

 

[boba]

Separators only work with DPP systems Legacy requires that you have 2 cables from the dish.

 

[rcdallas]

boba is right. You need to run a second line from the receiver to the SW64. Remove the DPP seperator (your signal splitter) connect both sat lines to the inputs Sat 1 & 2.

 

[aikoentp]

Thanks, I would have liked only useing one line. I'll just have to fish another in trough the conduit.