well i have figured something out, remember I am blind here on the screen, but I tuned in the skew on 99 to get the 85 pct quality, I saved it with the mem button on the panel, now when I switch to horizontal and back it goes back to the original 74 pct, i press call on the remote and...

yeah I save sats with the mem button on the receiver. I tried to save the skew but it still goes back to 0. For instance on the 99 sat on the abc net feeds on the vertical side when i drive the dish there it is at 73-74 quality, even bumping the dish which is good and actually very high...

yeah the funny thing is when i connect my ku dish up to the ku input it will show the fuzzy screen, as there is no analog up there for ku, however it still wont pull the menu or any other text up on the screen. on the c band side it just stays black with audio, i was able to listen to the...

No, this receiver here will not work on the tv screen, just audio. I think the video board is out, but I dont use it for signal anyways as I plug the lnb from the dish straight to the micro and then just run the motor and polarity off the analog receiver. What I was wondering is do most...

I am having a little skew issue., The receiver I am using it an uniden presiedent and i am using it for both motor control and polarity. I cant get into menus because the video will not show up on my tv for the analog receiver so what i did by using the front panel was program all sat...

also there is not alot east of 91 until you get to 72 AMC 6. the bird on 89 has some cbn feeds, and a few scrambled channels, the SES bird on 87 has to be very fine tuned to get the retro mix of 30 or so channels, then on 83 the signal is quite weak, for me anyways.. I get the P.A...

On the Micro Hd I am locked on at 73-75 pct quality which is high for a micro reciever. I know sometimes tps on that bird can be a little edgy though, you pretty much have to be spot on to pick them up.

I use birdog meters and actually have an extra for sale if you want it just p.m me.

first off i dont judge anyone because I think at some time or another a good majority of us on here have hacked things including satellite. i agree with the site not wanting to talk about it because they dont want to get shutdown and neither do we want that. With that being said people who...

yeah this one will do that and then say by source on the video and then a min later be locked in and functioning. However it is plugged straight up to a c band lnb, no switches or anything so I am confused as far as that goes.

Ok I have to first off say that with my ku motorized system the Microhd has been the best receiver I have ever had. Hands down! I seem to catch alot more than I have with any prior receiver. However since installing my 9 ft Bud and getting it connected to the micro I have noticed some...

well basically my setup is this c band dish motor and polarity wires run straight to analog reciever coax from lnb straight run to micro hd not to analog reciever ku dish cable running straight from motor to microhd reciever what i am trying to do is have the two cables combine into...

Getting s2 feeds on most tps now. gonna take some tweaking.

I am tuned in pretty well so far on my 9 footer but i notice quite a bit of s2 signals are showing 10 pct quality like the 87 luken mix and i am not scanning them in while most regular stuff is in the 70's on my microhd. Any of you have problems locking the luken channel mix? Thanks

yeah i found out it wasnt the tv, lol. For some reason on the screen it only shows when I hit the timer button and it says Sunday 12:00 a.m, it wont let me do anything and when I hit the menu button or settings nothing pops up on the screen even though the remote is working, so I can use...

Hi everyone I had a question about hooking up my motorized 1.1 ku dish and my c band dish on my microhd at same time. I tried reading some other posts on this but cant seem to find anything. I have a c band dish which I am running motor and polarity off an analog reciever while dish lnb is...

It works. Putting h-h motor up tomorrow. Right now using handcrank lol. It works! Using old box to change polarity and hitting Gdmx at 77 Oct.

On this dish the feedboom arm has a small hole that lines up with the dish mount and you install a self tapping screw there to align the feedarm correctly and this is how it ends up after putting in the screw. Does this look right to any of you? I just never seen a dish with the arm...

Ok i hooked it up to my dvd recorder and got it working but i still am gonna have to find a remote because i cant get t the menu without the remote. i will get it going though and yes i am gonna run my microhd through it so i can move the dish with the analog box.

I have not got dish up yet still have to get mesh on. i was trying to check the reciever out there is not sat hooked up to it. when i flip channels there is nothing on the screen at alk just a blue screen on my tv saying no signal.

I am using an uniden analog reciever and i have it hooked up to av port on my tv and it only shows on screen when i hit time otherwise my tv says no signal. i tried all ports on my tv. any of you ever had a problem running an analog on a hdtv?

btw forgot to mention it is steel conduit, not plastic. lol

well here is the deal, it is sch 40 conduit, heavy duty conduit that I got from work that runs about $20 per foot and I have another 4 foot piece with a coupling so if I wanted I could add them together and have 10 foot of pole, however I am not sure how screwing the top 6 foot pipe into a...

ok so my pole which is 6'2" should what be buried about 2' then that would leave 4'2" above ground level, does that seem like enough to have plenty of clearance from bottom of dish to the ground? Keep in mind where I live gust never get above 40-45 mph. Also in the winter it doesnt snow...

On my 1.1 meter motorized dish I am pulling in Cozi tv at around 72 pct and that is on a microhd. The micro signal bar is considerably lower than others such as pansat and Coolsat, On a pansat 72 pct on micro is around 89 on Pansat. I love that sat but yes scanning in tons of occasional...